This is AntaaLab nobu.

The other day, a customer who purchased some fittings requested that they create a partition using the fittings above the counter, so we created a fitting holder.

The holder is only 45mm deep to be installed in a narrow space. The thickness of the fitting itself is 30mm, so the front and back supports were only 7.5mm thick, but they still hold firmly.

The fixture can be used either vertically or horizontally and is finished with a paint that matches the colour of the fixture frame.

To prevent the holder from slipping, it is a good idea to attach double-sided tape to the bottom of the holder and attach it to the counter. Also, be careful when inserting and removing the holder, as applying excessive force to the front and back support parts can cause them to break or crack.

In this way, we accept orders while consulting with you about the size and other details depending on where you will be using the product.

If you are thinking about building partitions, please feel free to contact us!